Liquid damage is one of the trickiest DIY problems to repair, so if you’re unsure or need access to your phone’s important data, you should see an expert Apple repair service provider before pulling out your equipment. All iPhone 6S models, including the iPhone 6S 6S, Pro Max, XS Max, iPhone 6S XR, and iPods are compatible with these solutions.
What Does Water Damage on an iPhone 6S Look Like?
Liquid damage may be visible or imperceptible. Tiny bubbles under the screen or rust and discoloration in the charging port are two examples of how it can appear. On the other hand, water damage to an iPhone 6S typically does not appear to be anything, at least from the exterior.
How To Look For Water Damage On An iPhone 6S
The best approach to examine an iPhone 6S for water damage is through the liquid contact indicator or LCI.
Look Inside The SIM Card Slot For The LCI
To check the LCI, remove the SIM tray from the right side of the iPhone 6S, which is reachable by using a paper clip beneath the side button (the power button). Insert the paper clip into the minuscule opening. You might have to apply some pressure to remove the SIM tray.
- Your iPhone 6S should be held with the screen facing down as you remove the SIM card and SIM tray.
- From here, shine a flashlight into the SIM card slot to check the LCI.
- An iPhone 6S should be left face down on a flat surface rather than face up if it is damp.
- The LCIs are simpler to see on iPhone 6S. Use a flashlight to illuminate the charging port or headphone jack on your iPhone 6S, depending on the model.
Liquid Contact Indicator Color And Its Meaning
Red
A red LCI signifies that your iPhone 6S has come into contact with liquid, and you will be charged as a result. You’ll pay less for iPhone 6S screen replacement if you have carrier insurance or AppleCare+ than if you don’t. Even though an LCI is red, it is still possible for an iPhone 6S to be revived.
Yellow
Even though it doesn’t happen frequently, if your LCI goes yellow, don’t be alarmed. The good news is that yellow does not equate to red, proving that your iPhone 6S has not been damaged by liquids.
Taking your iPhone 6S to an Apple repair service provider won’t hurt if the LCI is still yellow. However, Apple repair specialists won’t be much assistance if your iPhone 6S is in excellent operating condition.
Pink
Your iPhone 6S has liquid damage, regardless of whether the LCI is light red or dark red, and is no longer covered by warranty. Your iPhone 6S’s LCI may have been tarnished by another chemical. Try cleaning the SIM card slot, headphone jack, or charging port with an anti-static brush or a fresh toothbrush.
How to Fix a Water-Damaged iPhone 6S
1. Turn off the Phone.
The faster you can power off your iPhone 6S, the higher your chances are of having it recovered. When prompted, press and hold the Power button while dragging the button at the top of the screen to the right. If you have an old phone, take the battery out.
Remove the charger from the phone immediately if it is still plugged in. If the screen is off and you’re unsure if the phone is on, quickly press the Power button to see if it turns on. Turn off the phone if this is the situation. In case it doesn’t, leave it off. Verify whether or not the “iPhone 6S screen water damage” issue has been resolved.
- If you have a case on your iPhone 6S, it may be trapping moisture; removing it will allow the phone to breathe.
- Take the iPhone 6S’s SIM card and tray out.
- Put a paperclip that hasn’t been bent or a SIM removal tool into the hole to remove the SIM tray.
- Obliterate the tray to allow water to escape.
- Use an absorbent, dry cloth to wipe the phone down.
- Remove all the extra moisture with an absorbent towel.
- Make sure that there is no moisture in the charging port, volume controls, headphone jack, or any other crevices.
- Check whether or not the “iPhone 6S screen water damage” issue has been resolved.
3. Fully dry the iPhone 6S.
Clean the ports using a piece of cloth and a toothpick. Use a small piece of cotton, such as one from an old shirt, to wrap the end of a toothpick. Use this to remove any water that may have entered the headphone jack or charging port.
Put the iPhone 6S in a warm, dry place. The easiest technique to get rid of the water inside your iPhone 6S is to let it air dry in a warm area for as long as possible. The best repair method is to let your iPhone 6S air dry.
Conclusion
Finally, Look for signs of water damage. Every iPhone 6S contains a little indicator that shows if the device has water damage or not. The indicator is a piece of plastic that glows red when exposed to excessive amounts of water. If you have more problems, then visit any authorized Apple service provider.
